SAUNA BUILDING

Building Materials for Bathhouses

The choice of building materials is the most important moment in the construction of bathhouses and saunas. The properly made ventilation in a steam room influences not only the state of steam and the maintenance of the most optimum temperature, but also the overall condition in a steam room to enable the latter to be not life-threatening for humans. If the ventilation has been made in a procedurally inappropriate manner or with poor quality material applied, then the consequences would be not only fungus and musty smell, but also headache and harm to health. In case of lack of fresh air in the sauna, one can even get poisoned by carbon monoxide.

Therefore, when arranging the sauna to be safe, you need to consider the high-quality building materials for the bathhouse. Such building materials are available in the Amilano Online Store Catalog.

Building Materials for Ventilation and Heat Insulation

The Amilano Online Store Catalog presents a range of building materials, air gates, valves, bars, and SPU Sauna-Satu insulation boards from leading European manufacturers.

The use of a special thin telescopic tube will allow ventilation to be installed directly into the wall between the outer casing and the insulation plates.

The equipment of the input and exhaust system of ventilation will allow for the timely removal of exhaust gases from a steam room and provide source of fresh air.

To protect the steam room from heat loss, SPU Sauna-Satu insulation plates, aluminum foil and adhesive tape are used. This allows you to protect the steam room from heat loss and drafts.

Other Products

Perhaps the customers of Amilano Online Store would be interested in:

• Protective compositions to protect surfaces from the effects of moisture and high temperature;

• Solutions of cleaning and disinfecting agents allowing removing even the contaminants ingrained in wood and other surfaces;

• Decorative stone for interior coating;

• Heat resistant silicone cable for reliable electric power supply.

Amilano offers the building materials for a bathhouse. You will be satisfied with the quality supported by guarantees and reliable reputation of the best European manufacturers.

Active filters

€64.20
2 - 7 work­ing days
Rectangular telescoping vent hood. Due to the small size of the hood, it can be placed between the thin walls. One side of the tube that has a seal is attached to the local ventilation and the other side without thread, is designed for the connection with exhaust covers. length 1400-2400 mm Thickness of 40 mm width 140mm Pipe diameter: 100 mm
€199.00
5 - 12 work­ing days
Ready-made seat for the steam bath made of moisture-resistant polystyrene. Before the installation you have to reinforce the seat (reinforced grid + cement slurry) After that you have to apply a hydro insulation and put the tile.  Price per meter.
€23.00
2 - 7 work­ing days
The fixing clips of this type are used for the assembly of wall panels (plastic, MDF) and wooden siding. The use if these fixing arrangements can make the assembly process much quicker. The clamps are produced from galvanized iron. There about 250 clips in the package. The package includes galvanized nails.
€112.34
5 - 12 work­ing days
Decorative stone - a natural lining material. Environmentally friendly and easy-to-lay. Wild stone looks great both on the facades of buildings, and in the interior. The life time of the lining of wild stone tens for years. It is truly eternal facing material. Repeatedly lining saves the building owner from worries about upgrading it’s facade for many years.   Price for 1 m2
€24.26
2 - 7 work­ing days
Linseed oil is natural cold-press linseed oil. The temperature pressing the linseed oil does not exceed 50°. Linseed oil is completely natural product. Linseed oil absorbs into the wood protecting it against dirt and moisture. Linseed oil brings out the texture of the wood. Linseed oil is also suitable for wooden surfaces which adjoin with food. Linseed oil is completely natural and safe for nature. Expenditure for plane wooden surface is 7 – 10 m2 /l.
€37.45
2 - 7 work­ing days
This glue for rock salt bricks is a special 2-component compound powder and is ready for use (to be mixed with the appropriate quantity of water). Price for 1 kg Preparation and use: The glue has the form of powder and is supplied in 1 kg bags in order to facilitate the preparation. Shake the powder in the bad thoroughly to ensure that both components are mixed well. Dissolve the required quantity of powder in water until you reach a saturated, uniform mass. Apply this mass promptly in thin layer to the surface of salt bricks and connect them with the other salt bricks.
€18.40
2 - 7 work­ing days
Instructions for use: Wash your sauna with a solution of 1 dl sauna cleanser and disinfectant and 10 litres of water. Wash the wood surfaces with the sponge using the protective gloves. If dirt is embedded in the benches, you can sandpaper it in the direction of the wood fibres using the sandpaper. After washing, rinse the wood surfaces with water and dry them carefully. Heating up the sauna speeds up the drying process. Protecting the wood surfaces with paraffin oil reduces the amount of moisture and dirt absorbed by the wood and enhances the shades of the wood surfaces. Paraffin oil is suitable for all wood surfaces, and, particularly, for heat-treated wood and alder surfaces. Test the oil on the undersurface of a bench first to see how the wood shade changes and whether the new shade is what you want. Wood is always unique, and the end result can be affected by things like the age, porosity and original shade of the surface. The wood surfaces must be completely dry before you start the treatment. Put the gloves on to protect your hands, pour the paraffin oil onto the sponge and spread it evenly. Let it stand for ½ - 1 hour and then wipe the surface dry if necessary. Heating up the sauna speeds up the drying process.
€39.00
2 - 7 work­ing days
Water-borne tintable acrylate finish for interior surface treatment of humid rooms. Supi Sauna Finish seals surfaces against moisture and dirt. Contains anti-mould agent that protects the treated surface. Suitable for use on wood, wood fibre board and concrete surfaces according to instructions for use. Especially suitable for walls and ceilings in steam, washing and dressing rooms.  Not suitable for treatment of benches.
€15.70
2 - 7 work­ing days
Carefree sauna Kingspan SPU Sauna is suitable for insulating sauna walls and ceilings as well as the ceiling surfaces of other rooms containing plumbing. The insulation boards can also be used in other spaces as the interior insulation layer of structures with panel cladding. Kingspan SPU Sauna is suitable for use in new building and renovation alike.
€16.16
5 - 13 work­ing days
The ventilation grill comprise a convenient and functional solution for the vent hole. They are made of durable wood and plywood, made to endure the heat and humidity of a sauna without twisting. Size: 240 x 150 mm
€27.00
2 - 7 work­ing days
By protecting the wooden surfaces with paraffin oil, you can reduce the amount of moisture and dirt absorbed into the wood. It also accentuates the shades of the wooden surfaces beautifully. Paraffin oil can be used for all wooden surfaces, but it is especially good for heat-treated and alder surfaces. Paraffin oil is included in the Harvia Sauna Care Set, an extensive package of products for the care of the sauna.
€20.00
2 - 7 work­ing days
The Valve ventilation comprise a convenient and functional solution for the vent hole. They are made of durable wood and plywood, made to endure the heat and humidity of a sauna without twisting. Size: 215 x 170 mm
€16.05
2 - 7 work­ing days
Water-borne tintable acrylate finish for interior surface treatment of humid rooms. Supi Sauna Finish seals surfaces against moisture and dirt. Contains anti-mould agent that protects the treated surface. Suitable for use on wood, wood fibre board and concrete surfaces according to instructions for use. Especially suitable for walls and ceilings in steam, washing and dressing rooms. Not suitable for treatment of benches.
€65.50
2 - 7 work­ing days
Heat treatment of aspen and alder improves the properties of wood considerably and opens up new fields of application of these types of timber. Heat treatment is the technology which involves natural changes in wood cells when exposed to supersaturated vapour under the temperatures of up to 240°C and the pressure of 0.1–0.2 MPa. In the result, the pure, environmentally friendly, solid wood with a wide range of colours is produced. Nowadays this type of wood is widely used in the production of decorative dark inserts, which emphasize the classy design of saunas. Thermally modified wood is as good as other species of wood. It is long-lasting and has a nice smell.
€950.00
5 - 12 work­ing days
To obtain the exact price of the glass solution, fill out the form in the attached PDF file and send it to us at info@amilano.de The price of the above goods is informative. The final price of your product will depend on the size you specified.