Set Saunaöfen Harvia Cilindro Pc90e Chrome + Harvia Xenio CS110
Offer of the week! Pack

Set Harvia Cilindro Pc90e Chrome + Harvia Xenio CS110

Harvia Cilindro PC90E Chrome

The Harvia Cilindro PC90E CHROME has a classic design. The recommended size of the sauna room 8 m³ - 14 m³. The maximum amount of stones – 100kg.
Stones are not included
Harvia Xafir Cs110 control panel
Harvia Xenio CS110 is suitable for sauna sizes 8 - 14 m³. On the control panel, you can adjust the temperature in the range of 40-110 ° C.
€627.30
VAT included
 2 - 7 work­ing days

banner.png

In-Store-Werbung

rating No review at the moment
If there are uninsulated stone / glass or similar surfaces in the walls or ceiling of the sauna, the heater will require more energy. For each non-insulated square meter of area, 1.2 cubic meters is added to the volume of the sauna.
Room size Room size
width (m)
depth (m)
height (m)
Construction Construction
My sauna is made of logs ?
My sauna has a glass door ?
Fire wall or non-insulated walls
square (m3) ?
Bake Bake
The estimated volume of your sauna room is 0 m3.

Description

Cilindro has an apertured outer casing made of stainless steel. You can adjust the nature of the heat from soft to sharp by throwing water either to the side of the heater or straight on top of the stone pillar. Cilindro H has a partially apertured outer casing in the front, which offers the sauna bather the benefits of a large stone amount, but also enables the heater to be located in smaller space. Cilindro F has a solid outer casing. The casing decreases the safety distance requirements, and therefore the heater’s space requirement is small and benches can be located near to it. This gives more freedom for creativity in sauna design. Cilindro F offers sharper sauna bath compared to the softer sauna bath provided by the other two Cilindro models. In Cilindro H and Cilindro F the stone space is made of stainless steel and outer casing is made of black painted, zinked steel. The heaters are equipped with a built-in control unit and the operating switches are placed down on the heater’s front side. The Cilindro models PC70E and PC90E are controlled by a separate control unit. The E-model heater can be embedded into the lower bench with the help of an embedding flange (PC1) made of stainless steel.

Stones are not included

Harvia Xafir Cs110 control panel

Control panel:

  • Temperature adjustment range: 40–110 °C;
  • Humidity adjustment range: 20–95 rH;
  • On-time adjustment range: family saunas 1–6 h, public saunas in apartment buildings 1–12 h. For longer operating times consult the importer/ manufacturer;
  • Delay time adjustment range: 0–18 h;
  • Control of lighting and fan;
  • Length of data cable: 5 m (10 m extension cables available, max. total length 30 m).

Power unit:

  • Supply voltage: 400 V 3N~;
  • Max. load from control unit to heater 11 kW;
  • Max load from control unit to steamer 3 kW;
  • Lighting control, max. power: 100 W, 230 V 1N~;
  • Fan control, max. power: 100 W, 230 V 1N~.

Sensors:

The temperature sensor WX232 is equipped with a resettable overheat protector and a temperaturesensing NTC thermistor (22 kΩ/ T=25 °C).

Data sheet

Harvia
PC90E+CS110
58 Items
0633710360043
Data sheet
{0}

Comments

Click here to leave a review

You might also like